Stainless steel chase covers
Stainless steel is the most common replacement material without needing paint.
Chimney Parts
Chase Cover Replacement Effort, PA
A chimney sweep in Effort can replace the metal cover on top of a framed chimney chase with a sloped top, drip edge and sealed collar around the flue. Call (570) 613-4907 to reach a local chimney sweep.
A chase is the boxed enclosure on the outside of a house that hides a factory-built chimney pipe, usually framed in wood and finished with siding or stone veneer. The top of the chase is sealed with a metal chase cover that has an opening for the flue pipe. Everything inside the chase depends on that cover staying watertight.
The cover that comes with most homes is a thin galvanized pan, frequently with no slope at all. Water pools on a flat galvanized top until rust sets in, and then it leaks. Rust running down the chase is usually the first clue.
Water that gets past the cover can do real damage inside the chase. Rotted framing, wet insulation, rusted firebox parts and water stains inside the house are all common results. The sooner the cover is replaced, the less damage there is to fix.
Depending on what the sweep finds, chase cover replacement in Effort, PA can go hand in hand with chimney cap installation and chimney leak repair.
Looking for Effort chase cover replacement? Call (570) 613-4907 to talk to a local chimney sweep.
Call nowThe process
How chase cover replacement works
A chase cover has to be sized to the chase and the flue, so measuring comes first.
Check the top
The chase is inspected from the roof for rust, holes and soft framing. Any rot in the framing is noted.
Measure the chase
The chase top is measured, along with the flue opening and its position. Covers are usually custom fabricated to fit.
Take off the old top
The cap and old cover are removed carefully so the flue pipe is not disturbed. The framing below is checked once it is exposed.
Fit the new top
A sloped stainless or copper cover is fitted and fastened through the side skirt. It is fastened through the skirt, not through the top.
Finish the top
The cap is reinstalled and the collar sealed with high temperature sealant. The finished top is checked for gaps.
What is included
Chase cover work
Chimney caps
Collars and caps are checked and replaced as needed for a complete watertight top.
Sloped tops
A sloped or cross broken top keeps water from pooling and keep the cover drier.
Skirt hems
Drip edges stop water from running down the siding and reduce staining.
Copper chase covers
Copper covers last a long time and develop a patina over time that weathers to a natural color.
Related service
Chimney Chase Repair Effort, PA
A failed chase cover can lead to damage inside the chase, from the framing to the fireplace. Common repairs include replacing rotted framing and sheathing, fixing or replacing siding, resealing trim and replacing wet insulation. Flashing where the chase meets the roof is checked too.
When you call (570) 613-4907 from Effort, mention where you have seen water or rust, since it helps locate the leak. Some chase repairs need carpentry, so ask how that work is handled. Fixing the cover without fixing rot underneath only delays the problem.
Local help
Chase Cover Replacement Near Me
Around Effort, flat galvanized chase covers are a common source of leaks and rust stains. In Effort and places nearby like Sun Valley, Sierra View, Indian Mountain Lake and Emerald Lakes, snow and rain sitting on flat chase tops speed up rust, which is why a chase cover is worth checking when the chimney is swept.
For chase cover replacement in Effort, PA or nearby towns like Sun Valley, Sierra View, Indian Mountain Lake and Emerald Lakes, call (570) 613-4907 to reach a chimney sweep who covers your street.
Chimneys in this climate
Winters here are long and cold, and the heating season usually runs from October well into April. The hardest thing on brick here is not the cold itself but the constant swing above and below freezing: rain and melting snow soak into the crown and joints, then freeze and push them apart, which is how cracks, loose bricks and leaks start. Nor'easters drive rain sideways into flashing and mortar that looked fine in summer. Most homeowners in Effort, PA schedule a sweep in early fall, and a repair check after a hard winter.
Why call
Why fix it now
Safer fires
A chimney problem fixed early rarely spreads to the masonry, the liner or the house.
Familiar with local homes
Local sweeps see the same chimney types and weather wear across Effort and nearby towns.
Know what happens next
Ask your questions before you agree to anything.
Chase Cover Replacement questions
Can water from a chase cover damage my fireplace?
A failed chase cover is one of the most common causes of water in a factory-built fireplace. It can lead to rust, damaged panels and stains around the fireplace. A new cover and collar are often the fix.
Should I patch or replace my chase cover?
Patching a rusted chase cover is usually a short term fix. A new stainless or copper cover with a slope usually solves the problem for good. The framing beneath should be checked while the cover is off.
How long will a new chase cover hold up?
A stainless steel or copper chase cover can last for decades. A sloped design and drip edge help it last by keeping water moving. Inspections every year catch problems early.
Why are there rust streaks on my chimney siding?
Many original chase covers are made of galvanized steel, which rusts once its protective coating wears away. Flat tops that hold water rust faster. The rust then runs down the siding as brown streaks.
What is a chase cover?
It is the metal lid on top of a chimney chase, which is the framed box around a prefab chimney. Without it, water would run straight into the chase. The cap and cover work together to keep water out.
More questions? Call (570) 613-4907
Related services
Chimney Cap Installation
Fitting a metal cap over the top of the flue to keep out rain, animals, leaves and stray sparks.
Learn moreChimney Leak Repair
Tracing chimney leaks to the real entry point and sealing it, whether the drip shows up in the attic, the ceiling or the firebox.
Learn moreChimney Waterproofing
Treating chimney brick and mortar with a breathable water repellent, applied after repairs so the brick sheds water but can still dry out.
Learn moreChimney Repair
Repairs for the masonry, crown, flashing and flue of a damaged chimney, so the chimney stays dry and safe to use.
Learn more
Looking for something else?
See all chimney servicesGet chase cover replacement help in Effort
Call (570) 613-4907 to talk to a chimney sweep serving Effort, PA.
(570) 613-4907
Free to call. No forms to fill out.